Predecessor : Pioneer DJM-900NXS2

One of the new things you cannot see from the outside is the improved sound quality due to new ESS 32-bit AC/DA converters, improved channel faders (like DJM-V10) and the new 3rd generation Magvel crossfader.

Features

• 4+2 channel mixer
• Color 2.7' LCD Display for Beat FX
• Microphone Phantom Power
• Interapp Support
• Send/Return can return on every channel
• 6 Color FX Filters :  Space, Dub Echo, Crush, Sweep, Noise, Filter
• 14 Beat FX : Delay, Echo, Ping Pong, Spiral, Helix, Reverb, Flanger, Phaser, Filter, Triplet Filter, Trans, Roll, Triplet Roll, Mobius
• Magvel Crossfader
• USB-B and USB-C computer connections
• Faders with steel rails and sideways mounted circuit
• P-Lock Fader Caps prevent loosing fader caps
• Quantized Beat FX
• ProDJ Link Support
• DVS Supported
• Beat Indicator Display
• Send/Return assignable to each Channel, Crossfader, Mic or Master
• Return possible on every channel
• 2 Microphone with Trim, Advanced Talkover and shared 2 Band EQ
• Beat FX Time control, Beat skip buttons and variable control, blocks in display lights up at synced times (¼, ½, 1, 2 etc)
• BPM Counter Display
• Auto BPM/Tap
• 3 step Cross Fader Curve adjust
• 3 step Channel Fader Curve adjust
• Per Channel : PFL Cue, 3 Band EQ, Trim, Faderstart (ProDJ Link)
• Equalizer Selectable : -26dB or -∞ Isolators
• PFL Mono Split
• 15 segments VU Meter
• Master Volume Rotary
• Master Balance control
• Master Mono/Stereo Switch
• Booth Monitor Output
• Record Output

Differences and/or expansions compared to the DJM-900NXS2

• Center Lock on the Color FX, if activated the knob locks at 12 oçlock. When releasing tension on the knop the lock will release so you can turn further
• Computer connections on the mixer for both USB-B and USB-C connectors
• Bluetooth input, sound can be routed to each of the channels
• USB input, alle devices connected with USB cable can be played back on each of the channels
• Digital terminals on the backside are now in a row instead of the 2x2 cluster
• 2-way EQ for Booth/Monitor
• 2 fully independent Headphone circuits so 2 artists van use different mixes on their own headphones in case of a B2B set
• 3 new Beat FX: Mobius, Triplet Roll and Triplet Filter
• Beat FX channel selector are now press buttons instead of the rotary
• Beat FX display is now a 2.7”color LCD that shows icons above the X-pad when in use
• Beat FX can now be teruned on each channel, not only the channel it is applied to
• Support for the new Stagehand app

Microphone section

• Phantom (48V) power supply
• 3 Microphone FX with parameter control: Echo, Pitch, Megaphone
• Mic Reverb with parameter control
• Push-to-Talk and on/off button

Specifications

• Inputs : 4 Phono(RCA), 4 Line(RCA), 4 Digital(RCA), 2 Mic(XLR Jack Combo, Jack), Bluetooth, USB-cable
• Outputs : Master (XLR, RCA, Digital RCA), Record(RCA), Booth(Jack), Headphones(Jack, Mini Jack)
• Connections : 2 USB-A, USB-B, Send/Return(Jack), ProDJ Link(USB, Ethernet), MIDI(DIN), Bigger Ground Terminals
• EQ Low : -26/∞ +6dB @70Hz
• EQ Mid : -26/∞ +6dB @ 1kHz
• EQ High : -26/∞ +6dB @13kHz
• Mic EQ Low : -12 +12dB @ 100Hz
• Mic EQ High : -12 +12dB @ 10kHz
• Mixing Processor : 96kHz/64bit floating point ES9026PRO
• DA Converter : 32bit ES9026PRO
• AD Converter : 32bit ES9842QPRO
• 61 Assignable MIDI channels and clock
• Frequency Response : 20Hz - 40kHz
• Signal to Noise : 105dB
• Distortion(THD) : 0.005%
• Power Supply : 220-240VAC @ 50/60Hz
• Dimensions (WxDxH) : 407.4 x 458.3 x 108mm
• Weight : 10.2kg