The Pioneer DJM-500 was Pioneers first real DJ Mixer and it introduced the BPM synced effect section to the world.

Successor : Pioneer DJM-600

Other than all the things you ecspect on a DJ mixer, the DJM500 has a BPM section that is synchronised to the tempo of the track. The timing can easily be changed in steps related to the BPM like 1, 2 or 4 beat, but also 1/2 or 1/4 beat can be set.

The effects can be toggled on and off with the illuminated button in the lower right corner closest to the DJ. There is no Level/Depth, only effect parameter control

Features

4+1 Channel Mixer
Per Channel : PFL Cue, 3 Band EQ, Trim, Faderstart
BPM Counter Display
6 Beat FX, beat synced : Auto BPM (only count the BPM), Delay, Echo, Auto Pan, Flanger, Reverb, Pitch Shifter
Send/Return assignable to each channel, mic or master
Beat FX Time control, variable control, LED lights up at synced times (¼, ½, 1, 2 etc) below BPM counter
Crossfader, each channel assignable, can be disabled
PFL EQ control
PFL Mono/Stereo Switch
Master Volume Fader
Master Balance control
Master Mono/Stereo Switch
Master Attenuator control on back
Booth Monitor Output

Specifications

• Inputs: 3 Phono(RCA), 4 Line(RCA), 2 Mic(XLR, Jack XLR Combo)
• Outputs: Master (XLR, RCA), Booth(RCA), Headphones(Jack)
• Master XLR: Pin 3 Hot, Pin 2 Cold !!
• Connection: Send/Return(Jack), Faderstart(Mini Jack)
• EQ Low: -20 +12dB @100Hz
• EQ Mid: -20 +12dB @ 1kHz
• EQ High: -20 +12dB @10kHz
• Mic EQ Low: -20 +12dB @ 100Hz
• Mic EQ High: -20 +12dB @ 10kHz
• Frequency Response: 20Hz - 20kHz
• Signal to Noise: 90dB
• Crosstalk: 70dB
• Power Supply: 220-240VAC @50/60Hz
• Power Consumption: 37W
• Dimensions (WxDxH): 320 x 357.4 x 107mm
• Weight: 5.9kg