Successor : Pioneer DJ DJM-5000

In essention the DJM-3000 is a stretched version of the Pioneer DJ DJM-600 with these differences :
19'' rack mountable
No Sampler
Special Effect Mix Section
Optional rotary kit available DJC-3000RV

The DJM-3000's backside is shaped like you can see on one of the pictures. This way the connectors in the rear are not taking another 1 HE of rackspace when the mixer is mounted in a rack.

Features

4+2 Channel Mixer
Per Channel : PFL Cue, 3 Band EQ, Trim, Faderstart
2 Microphone with 2 Band EQ, Trim and Talk Over
BPM Counter Display (70-180BPM)
Send/Return assignable to each Channel, Crossfader, Mic or Master
9 Beat FX, beat synced : Auto BPM, Delay, Echo, Pan, Trans, Filter, Flanger, Reverb, Pitch Shifter
Beat FX can now also be applied on the Crossfader
Beat FX Time control, Beat skip buttons and variable control, LED lights up at synced times (¼, ½, 1, 2 etc) below BPM counter
Crossfader, each channel assignable, can be disabled
PFL Mono Split
PFL Mono/Stereo Switch
Master Volume Fader
Master Balance control
Master Attenuator control on back
Booth Monitor Output
Record Output

Specifications

Inputs : 3 Phono/Line(RCA), 4 Line(RCA), 1 Phone/Mic (RCA/Jack), 1 Mic(XLR, Jack)
Outputs : Master (XLR, RCA), Record(RCA), Booth(RCA), Headphones(Jack)
Master XLR : Pin 3 Hot, Pin 2 Cold (pin 2 & 3 switched)
Connections : Send/Return(Jack), Faderstart(Mini Jack)
EQ Low : -26 +12dB @100Hz
EQ Mid : -26 +12dB @ 1kHz
EQ High : -26 +12dB @10kHz
Mic EQ Low : -12 +6dB @ 100Hz
Mic EQ High : -12 +6dB @ 10kHz

Sampler Sampling Rate : 44.1kHz @16bits
Sampler A/D Converter : 20bits

Frequency Response : 20Hz - 20kHz
Signal to Noise : 87dB
Distortion(THD) : 0.02%
Power Supply : 220-240VAC @50/60Hz
Power Consumption : 34W
Dimensions (WxDxH) : 482 x 220(5HE) x 107mm
Weight : 6.9kg