Pioneer DJM-5000  Installation/zone mixer with Mic Filters

Submitted by Lead   on 10-08-2009 09:01
This content is © 2009-2025 The DJResourceVote :   

Also in the Gearbase: Pioneer DJ - Mixer Overview

Gearbase product details : Pioneer DJ DJM-5000

With their DJM-5000, Pioneer has raised the standard for 19 inch rackmount mixers. The Pioneer DJM-5000 brings some nice new tricks to the (mobile) DJ. It does NOT contain any beat effects like you're used to have on the previous DJM-series mixers (DJM-600, DJM-700, DJM-800). It does features multi zone output, some great mic effects and a totally new Talk Over functionality.


The DJM-5000 offers great sound quality as it has the same basic circuitry as the DJM-1000. The analogue signal from the media player is digitized at 96kHz/24-bit, so it reaches the digital mixing stage in the best possible state. Mixing is then carried out by 32-bit digital signal processing with minimal deterioration of sound quality.

---

USB Audio Interface

You can hook up you computer (Mac & Windows) to the DJM5000, when you use Windows with the Asio driver, it can output 3 different audio signals directly to the mixer. There is no need for an audio card or to make lots of connections as everything is transported via USB. Make sure to select the proper audio output in your mixing software.

USB MIDI Controls

There are 61 different MIDI channels that can be controlled by various knobs, buttons and faders. The MIDI signal is transported to your computer via the USB connection.

By making the proper mappings to your software and selecting the right audio outputs you only need your laptop (without sound card) and the DJM-5000 to perform.

Zone Output

The Pioneer DJM5000 has lots of outputs: Master Output, Booth Output, Record Output and a Zone Output. The first three of these outputs need no explanations but the Zone Output is new for Pioneer.

With the Zone Output you can use the DJM to control the audio in 2 room independently from each other. You can set the Zone Output to Master to have the same sound on the Master and the Zone output. If you select any of the channel (1-4) you can send that channel to Room 2 to have some background music. In the main room you can use the Master output and the other channel to do your mixing.

Sound Maximizer

When used on some locations the sound might need some optimizing, this is what you can do with the Sound Maximizer. Mostly the Clarity and Dynamics controls will be near the Minimal position, only turn it on when needed to avoid distortions when playing at max levels!

Send/Return

This is one of the features that is included in all Pioneer DJ mixers and can be used to connect and external Effector like the EFX-500 or EFX-1000. This unleashes lots and lots of possibilities. Read the EFX-topics for more.

Microphone Section

The third microphone input can be found on Channel 1 so when used you have the full 3-band Equalizers to adjust the vocals. You cannot use the Microphone Effects on Mic 3 though. For ease of reading the following is for Mic 1 and Mic 2:

Output Routing

You can route each microphone to either the Master Output, the Zone Output or both. You can also assign both mic's to different outputs so 2 people can actually say something in different areas with one mixer.

3-band Equalizers

Each of the microphones has a 3 band Equalizer for maximum control of the sound. Each band has a range of +/- 12dB.

Advanced Talk over

The on/off lever for the Talk over has changed to an illuminated push button. In NORMAL mode the Talk over reacts as you would suspect, it lowers the overall volume of the audio over the complete frequency range. This is shown is the diagram.

In advanced mode only the frequencies around the human voice (mid-range) are lowered while the low and high frequencies remain at their level. This way you loose less 'drive' at the dance floor.

Mic Effects

The Effect knob on the Microphone Channels control the amount of effect that is added. With the blue buttons you can select the type of effect that you want to add. You can only activate 1 effect at a time so the effect is used for both mic channels.

Reverb : Give a sound more 'room'
Echo+Verb : Combination of Echo and Reverb to widen the sound
Octaver : Match vocals with current key
Pitch : Controls the pitch of the sound

Other Features

Offcourse all the standard features of a Pioneer DJM-series mixer are included aswell.

3 Band EQ and Trim per channel
10 LED VU meter next to each channel, Master and Zone
Microphone clip indicator LED
Cue (PFL) listening on each channel, Master and Zone
Cross Fader
Cross Fader Curve control (3 steps)
All channels assignable to each side of the Cross Fader
Mono/Stereo Switch
MIDI on/off switch
Zone and both Microphone channels can be turned off (muted)
Level Att. on backside for Master and Zone

 Product User Manual

 High Resolution Images

There are 8 Comments