JB Systems D2-1200

Features

Professional 2-channel amplifier with built-in active crossover.
Power stereo 4Ω (1kHz, THD+N<0,1%) = 2x 600Wrms
Power bridge 8Ω (1kHz, THD+N<0,1%) = 1200Wrms
Very compact housing, only 2U (88mm) high
Oversized power supply guarantees a powerful bass reproduction
Built-in active crossovers: no need for separate crossover units to setup an active system.
24dB/octave crossover p.channel: adjustable crossover point (90~250Hz)
Crossover 3 operation modes: HPF (high pass filter) + LPF (low pass filter) + OFF (no filter)
Two amplifier modes: stereo and bridge
Peak limiters can be switched on/off
Soft start power supply
Very efficient cooling
DC fault protection
High temperature protection
Overload and short circuit protections
Balanced inputs with combo connectors (jack + XLR)
XLR-outputs: daisy chaining of several amplifiers
3 Speakon® outputs: left + right channels + bridge
3 models with different output power available

Specifications

Power stereo 8Ω (1kHz, THD+N<0,1%) 2x 400Wrms
Power stereo 4Ω (1kHz, THD+N<0,1%) 2x 600Wrms
Power bridge 8Ω (1kHz, THD+N<0,1%) 1200Wrms
Frequency Response : 20-20.000Hz
Built-in active crossover : 24dB/oct. crossover 90~250Hz
THD: < 0.1%
Crosstalk @ Rated Output 8Ω/1kHz = < 75dB
Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut
Input sensitivity : 770mV
Input impedance : 20kΩ Balanced, 10kΩ unbalanced
S/R ratio : >90dB
Damping factor 8Ω/1kHz > 600
Cooling Dual speed fan cooling
Input Connections : Balanced XLR, unbalanced Jack (COMBO)
Output Connections : 3 Speakon® for Stereo & Bridge Output
Power Supply : 230Vac / 50Hz
Dimensions(WxDxH) : 482 x 473 x 88mm
Weigth : 19kg