The djm-800 or xone 92 (3/6) 
LOCKED
Poll : Djm 800 or xone 92
PLEASE help me... i really need to know which one to buy... i cant make up my mind... and once i buy one of them there is no turning back, because of all the money that were talking about...
anyways, have any of you tried both of these mixers?
Is the xones sound a lot better? if you add a efx-1000 to the xone will it be able to do most of the things that the djm 800 does...
help anyone?
anyways, have any of you tried both of these mixers?
Is the xones sound a lot better? if you add a efx-1000 to the xone will it be able to do most of the things that the djm 800 does...
help anyone?
What do you think about The djm-800 or xone 92 ??
Vote :
OK we understand you don't like ads (so don't we) but,
Please consider making this website possible by disabling your Ad Blocker.
Or become a Gold Member, they don't see ads.
Please consider making this website possible by disabling your Ad Blocker.
Or become a Gold Member, they don't see ads.
I agree with Lead. do NOT turn on the power anymore.
As for the tech support, Xone does supply a step by step plan in it's manual for opening the xone to set dip switches. I am not sure if this voids warranty.
I opened my xone about 3 weeks ago and it was easy to do. But there aren't that much things that can get loose in there.
no you can't open the xone itself, it does have internal switches and jumpers but this may only be done by specified personel.
the only option is to send it back to the store or the importer.
Allen & Heath is proud of its costumers, and they will help you the best they can, so don''t worry about that!
DAMN IT!!!! just when i waited at least a month.. i have to send it back 
Ill try to roll the piece out of the air stripes
Since something from outside probably somehow got in!
Ill try to roll the piece out of the air stripes
Since something from outside probably somehow got in!
Temsethat's sucks for you teddyaakre finelly you ghot him and now he's broken:s
YEEEESSSS!!!!!! You cant imagine how amazingly happy I am!!
I used a stone-age technique, I put the Xone on its side until i could see the object.. Then got it to lie where the "air holes" are.. and then i took a wire and looped it around and pulled it out..
It was similar to a screw, I will post a picture later, so that you who have allready opened it before can have a look.. and see if its important.. All the channels work.. and I am mezmerized by the miksers amazingness.. thanks for all the comments and recommendations.. GO XONE!
mmmz, if i was you i should have send it back, to let specified personel have a look at it what the object was, maybe its something that should be in there! so the mixer might work now, but maybe in a week or so, something doesn't work properly and then you still have to send it back!
but good for you it works, experience XONE!
Well lets see those pictures Teddy. I will post some pictures of the inside of the xone when i have the time.
There are not that many screws inside the xone. Only for each channel plate that connects to the mainboard there is a fix screw. Ok, just took a look, 9 channel plates and in total 10 screws. These screws however are part of the ground connection so quality wise important.
There are some black screws holding the power source in place.
Arggg, just post that picture, i'll work on mine.
after some bitching with the picture, you moderators are crazy you know that. You want quality but you only give 100kb?
User edit by Gilles on 28-04-2006 @ 14:09:13 (39%)
go find your screw now. hahahahaha.
Its not exactly a screw.. is more of a bolt.. like the thing that you put on a screw if it is too long... i dont know how to explain.. i will send in a pic as soon as i can
This is the closest pic i could find on the internet right now..
It is the small thing on the pic.. not the screw itself
http://www.cpenterprise.com/cpenterprise_greenoptions_files/parts/bolt.jpg
User edit by teddyaakre on 29-04-2006 @ 12:15:06 (100%)
That, my friend, would be a nut. The only place i can think of for those to be fixed is the side of the bottom part. To fix the side plates (ears) there are nuts welded inside. See if you can attach those ears and fix every screw. If one doesn't grip then you know that's it's that nut missing.
Ok.. well that means that i dont have to send it in to the shop! Because i am never going to rack mount it anyways
just check it to be sure Teddy.
Ill check it.. once i have time..
I very recently got the x one 92 , after a lot of research , i switched from a pioneer 600 . I also tried out the 800 ,
in my opinion x one 92 is just another level , the feel to the mixer is mind blowing , further the 4 band eq is some thing that really helps me , the options are good
and i am glad i spen it on the x one , it costed me a fortune consdering where i live but its all worth it
Can some tell me how to register my allen & heath
peace
I agree junaid.. its just one of those un-explainable phenomenons of dj'ing
Poster: JunaidCan some tell me how to register my allen & heathgo to the allen & heath website or visit this link: http://www.allen-heath.com/register.htm
thanks done
the ideal combination would actually be a DJM800 with a A&H filter connected to the send/return... i like the DJM800 a lot more than the A&H - regardless of soundquality - as you don't even hear the difference usually unless you have an amazing set of monitors (at home) or a high-end soundsystem (in the club). But, on the other hand, i am absolutely in love with the endless flexibilty, control, and sound of the xone's filter units... I'm missing the control parameters on the DJM800.... you can't even control dry/wet! Too bad it all has to be so expensive!
you should really ask this in a pioneer forum, not a surprise the djm 800 is most rated here
but if you ask me, there is nothing better to get than the xone92, because of the filters and faders, it doesnt have an effect unit but you can better buy a efx 1000
but if you ask me, there is nothing better to get than the xone92, because of the filters and faders, it doesnt have an effect unit but you can better buy a efx 1000
yeah I think get high is right but what I dont get is this: is the xone 92 realy worth that filters? cause if you pay 2/3 of the price you can buy like the ecler nuo 5 wich has also got good faders good filters and a effect processor, is the xone realy worth 500 euros more? for only the filters
Poster: soundcollectoryeah I think get high is right but what I dont get is this: is the xone 92 realy worth that filters? cause if you pay 2/3 of the price you can buy like the ecler nuo 5 wich has also got good faders good filters and a effect processor, is the xone realy worth 500 euros more? for only the filters
the moto behind all this is, get rich or die trying
its mostly used in fancy clubs and big partys, by famous dj's, like speedy j en chris liebling, they use 3 of em
if you compare the xone92 with the ecler nuo5, you can say the xone is 1500 euro more expensive because if you want a effector, you will need to buy a efx 1000 or something
Speedy J uses his own :464 right...
then i dont get it why poeple that are not rich buy this thing? or how about all the things you hear about the djm 800 what is so special about this
? or how about all the things you hear about the djm 800 what is so special about this Poster: soundcollector
then i dont get it why poeple that are not rich buy this thing
its pioneer, thats why its so popular
but if the quality is the same as the djm600 its defenately not a bad mixer, but still very expensive
OK we understand you don't like ads (so don't we) but,
Please consider making this website possible by disabling your Ad Blocker.
Or become a Gold Member, they don't see ads.
Please consider making this website possible by disabling your Ad Blocker.
Or become a Gold Member, they don't see ads.
94 Users online: 14 Guests (80 Unknown)
Pages generated today : 42.933
Most visitors online this month : 361
Lifetime Pageviews since 2003 : 238.431.307
Most visitors online this month : 361
Lifetime Pageviews since 2003 : 238.431.307