Ecler MAC70I - Ecler MAC70V

   

Ik zit er aan te twijfelen welk mengpaneel te kopen, daarom vraag ik aan jullie wat het grote verschil is tussen de MAC70I en de MAC70V van Ecler is?
( Heeft de 70I een VCA circuit? )
( Er is een groot prijsverschil tussen de MAC 70I en de MAC70V ) 

Ecler Mac 70I
--------------------
6+1 CHANNELS and 13 INPUTS:
3 PHONOS, 3 CDs, 3 LINES, 3 BAL MICROPHONES (XLR3).

Input selection through lever switch.
AUX and MIX inputs with a direct access to the main mix bus.
Outputs: 2 OUT with independent volume control (OUT 1 balanced), two REC recording outputs and a CUE output which allows monitoring through external amplification.

Crossfader: Modular and removable, allows a direct transition between channels. Assignable to channels 5/3, 4/6. The unit includes a spare crossfader.

Internal modular building, SMD technology.

Control panel with 15º of tilt for an easier operation.

Sensitivity levels internally configurable through jumpers for all inputs and outputs (see technical characteristics).

Independent input sensitivity controls for each channel (±20 dB), GAIN.

3-band channel-independent tone controls: TREB, MID, BASS, with a ±15 dB operation margin.

Prelistening with headphone volume control and possibility of monitoring through external amplification, CUE output with volume control, MONITOR section.

Assignable Talkover with efficiency and recovery time controls.

Double VU meter . The left VU meters displays the channel level with the PFL switch (pre-fader listening enabled) or the main mix, MIX, when no PFL is enabled. The right VU meter displays the existing level at the selected outputs or at the main mix, MIX, when none of the switches under the VU meter is enabled.

Independent balance control for each output and mono/stereo switch, L+R.










Ecler Mac 70V
--------------------
6+1 kanaals met 13 inputs
·   Independent input sensibility control for each channel with ±20 dB adjustment range, GAIN
·   Independent 3 band tone controls for each channel with –20dB to +10 dB adjustment range on channels 1 to 3 +AUX and from CUT to +10 on all other channels of both models.
·   Pre-Listening function with headphones volume control and monitoring possibility through the CUE output (with dedicated volume control) and an external amplifier.
·   Assignable Talkover function with efficiency and recovery time controls.
·   Phantom power supply for condenser microphones, general ON/OFF switch on front panel and individual internal settings.
·   Dual VU-Meter
o   The left VU-Meter displays the prefader level of the channels which have the PFL switch activated or the main mix level when none of the PFL switches is activated.
o   The right VU-Meter displays the signal level of the output selected in the section below it. If none of these switches is activated, the main mix level will be displayed.
·   Inputs: 3 PHONO, 4 HIGH LINE (high level line for compact discs, DAT, MP3 players), 3 LOW LINE, AUX IN and MIX; plus 2 inputs ready for balanced microphones (XLR3).
·   Outputs: 2 OUT Outputs with independent volume control (OUT 1 balanced), two REC outputs and one CUE output.
·   ECLER Cross-fader: Modular, removable fader with VCA circuit. Channels 1, 3 and 5 can be assigned via the XFA switch to the A side of the cross-fader. An analogue XFB switch at the even channels 2, 4 and 6 assign these signals to side B of the cross-fader. In any case, when these switches are not activated, the signals are directly assigned to the main MIX bus.
·   Assignable Talkover with efficiency and recovery time controls.
·   Double VU meter. The left VU meters displays the channel level with the PFL switch (pre-fader listening enabled) or the main mix, MIX, when no PFL is enabled. The right VU meter displays the existing level at the selected outputs or at the main mix, MIX, when none of the switches under the VU meter is enabled.
·   Independent balance control for each output and mono/stereo switch, L+R.


Mvg,
Seca

neem hier eens een kijkje

piezen dat de 70V de nieuwste versie is van de 70i
dus waarschijnlijk zal de 70V beter zijn --> beter componenten enz.

wat prijs betreft
de 70V kost 1029€
en de prijs van de 70I vind ik nergens
dus denk niet dat hij nog gemaakt worden

Worden idd niet meer gemaakt.
( 2dehands kopen )
De 70V is idd de nieuwere versie, maar wat zijn de grote verschillen?

Poster: beerbo
neem hier eens een kijkje

 

Thx, Dat van die 60mm Faders wist'k nog niet

Nog iemand die in grote lijnen de verschillen kent?