Ecler Smac 40/42

   

Independent input sensibility control for each channel with ±20 dB adjustment range, GAIN.

Independent 3 band tone controls for each channel with –20dB to +10 dB adjustment range on channels 1 and 2 and from CUT to +10 on all other channels.

Pre-Listening function with headphones volume control and monitoring possibility through the CUE output (with dedicated volume control) and an external amplifier.

Phantom power supply for condenser microphone, with individual internal ON/OFF settings.

VU-Meter: Displays the level of any channel signal before the fader (PFL), main programme mix (MIX) or AFL output.

Independent Balance for each channel and L+R switch for summing both stereo signals.

Inputs: 2 PHONO, 3 HIGH LINE (high level line for compact discs, DAT, MP3 players), 2 LOW LINE, AUX IN and MIX; plus 1 input ready for balanced microphones (XLR3).

Outputs: 2 OUT Outputs with independent volume control (OUT 1 balanced), two REC outputs and one CUE output.

ECLER Crossfader: Modular, removable fader with VCA circuit. Channels 1 and 3 can be assigned via the XFA switch to the A side of the crossfader. An analogue XFB switch at the even channels 2 and 4 assign these signals to side B of the crossfader. In any case, when these switches are not activated, the signals are directly assigned to the main MIX bus.

 
Bron:  http://www.ecler.es

Ik hoop dat je hier wat aan hebt